header image
Home arrow Fireman Intercom System arrow Fireman Intercom / 2-way Emergency Voice Comm System arrow V25-70 Hardwire Fireman Intercom
V25-70 Hardwire Fireman Intercom PDF Print

 Vanguard V25-70 Fireman Intercom - Hardwired Type

Click here to view       Click here to download brochure

The Vanguard Model: V25-70 Fireman Intercom / Two-way Emergency Voice Communication System's modular design allows the system to be expanded to suit a wide range of buildings.

Simplicity and Reliablity are two key concepts that has been designed into the system.

Simplicity
Frequently used function such as answering incoming calls require only lifting of the Master Handset. Placing calls to remote handset require only one button press. Important system status are provided with individual indicators e.g incoming calls and handset fault indication.

Reliablity
Continous supervision of all remote handsets for faults with fast, clear indication when a fault is detected. Battery and system charger are monitored to ensure that any system malfunction are quickly and clearly annuciated.

Features:
- Modular design: Each Handset Zone Selector Module controls and supervise up 10 zones
- Dedicated call buttons: One press operation - easy to use even during emergencies
- Initiate calls: Able to initiate calls to remote handsets
- Dedicated indicators: Incoming calls and handset faults are indicated by dedicated indicators
- Privacy mode: Ensures confidentiality
- Boost charge facility: Faster recharging of battery after a power outage
- Lamp test facility: Quickly test all indicators with one button

 Model: V25-71 Master Charger ModuleModel: V25-71 

Features
  Battery charging and supervision
-   Digital Volt and Amp meter
  AC/ DC fuse protection
-   Float and boost charge mode
  Auto boost charge cut off 
  Internal AC mains switch & fuse 

Specification
-   Size: 110 (w) x 316 (h) x 110 (d) mm
-   Weight: 1750 gram
-   Material: 16 gauge sheet steel
-  
Finish: Powder coated paint, beige white
-   Input: 230 VAC
-   Output: 28.8 V ± 0.5 VDC, 4A*
-   DC Fuse: 5A*-   Battery Fuse: 3A*
-   Output Fuse: 1A* 

Configuration

One module per system, compulsory

* Ratings for system above 80 zones available on request 


Model: V25-72 Common Trouble Indicator Module

Model: V25-72 

Features
-   System fault annunciator
-   Common fault indicator
-   Audible buzzer
-   Call, Busy, Ready tone generator
-   Supervisory circuit   

Specification
-   Size: 110 (w) x 316 (h) x 52 (d) mm
-   Weight: 350 gram
-   Material: 16 gauge sheet steel
-   Finish: Powder coated paint, beige white
-   Input: 15 VDC
-   Quiescent current: approx. 25mA
-   Lamp Test Current: approx. 200mA 

Configuration
One module per system, compulsory  




 Model: V25-74 Handset Zone Selector Module
 
Model: V25-74 

Features
  Support 10 Remote Handsets
-   One press operation
-   Individual Call and Fault indicators
  Individual Select buttons 

Specification
-   Size: 110 (w) x 316 (h) x 100 (d) mm
-   Weight: 510 gram
-   Material: 16 gauge sheet steel
-   Finish: Powder coated paint, beige white
-   Input: 15 VDC
-   Quiescent current: approx. 25mA
-   Lamp test Current: approx. 200mA 

Configuration
One module for every ten Remote Handsets, compulsory

Note: Requires one Line Supervisory Card (V25-74.1, not shown) per connected Remote Handset
.


 

 Model: V25-73 Master Handset Module

Model: V25-73

Features
-   Master Handset
-   CPU circuit

Specification
-   Size: 110 (w) x 316 (h) x 100 (d) mm
-   Weight: 630 gram
-   Material: 16 gauge sheet steel
-  
Finish: Powder coated paint, beige white
-   Handset: Red Hi-impact ABS plastic
-   Input: 24 VDC
-   Quiescent current: 20mA
-   Ring Tone: 2 kHz
-   Microphone: Carbon
-   Output impedance: 300 -1K ohm
-   Frequency Response: 200 – 3450 Hz
 

Configuration
One module per system, compulsory
 


 
Model: V25-79 Cassette Interface Module
 
Model: V25-79 

Features
-   Auto recording, starts recording when Fire Alarm is activated
-   Records both Fireman Intercom communication and One-way Emergency Voice Comm. annoucements

-   Digital time lapse indicator
-   Cassette status monitoring  

Specification
-   Size: 110 (w) x 316 (h) x 100 (d) mm
-   Weight: 630 gram
-   Material: 16 gauge sheet steel
-   Finish: Powder coated paint, beige white
-   Input: 24 VDC
-   Quiescent current: 200mA 

Configuration
Optional.

Note: Module includes cassette deck, mounted externally (not shown)
   



Model: V25-75 Remote Handset
 

Model: V25-75
 

Features
-   Housed in heavy gauge steel
-   Lockable housing with breakglass door release
-   Top and bottom entry
-   Retractable cord 

Specification
-   Size: 180 (w) x 386 (h) x 88 (d) mm
-   Weight: 3950 gram
-   Material: 16 gauge sheet steel
-   Finish: Red enamel coating
-   Handset: Red Hi-impact ABS plastic
-   Input: 15 VDC
-   Quiescent current: 20mA
-   Ring Tone: 2 kHz
-   Microphone: Carbon
-   Output impedance: 300 -1K ohm
-   Frequency Response: 200 – 3450 Hz 

Configuration
Quantity depends on site requirement, compulsory

 
Model: V25-751J Portable Handset
 
Model: V25-75.1J 

Features
-   Portable Handset with jack 

Specification
-   Size: 110 (w) x 316 (h) x 100 (d) mm
-   Weight: 630 gram
-   Handset: Red Hi-impact ABS plastic
See V25-72 for elect. specification 

Configuration
Depends on project requirement.   

 

Model: V25-751SK Remote Handset Socket
 

Model: V25-75.1SK

Features
-   Surface and flush mounting type 

Specification
-   Material: 16 gauge stainless steel
-   Surface: 85 (w) x 85 (h) x 40 (d) mm
-   Flush: 80 (w) x 85 (h) x 40 (d) mm
-   Weight: 350 gram 

Configuration
Depends on project requirement